Qingdao AIP Intelligent Instrument Co., Ltd. is a high-tech enterprise focusing on the global motor test, which provides intelligent test products such as motor stator test, motor test, cast aluminum rotor test, armature rotor test, dynamometer test, etc. for the global motor industry. The products have been widely used in household motors, water pump motors, electric tool motors, automobile motors, industrial motors, servo motors machinery and other fields. AIP provides an effective guarantee for the stable operation of the motor.

Let’s discuss about how to do if the motor leaks electricity?

I. The main causes of motor electricity leakage

1. Moisture intrusion or rain and water penetration into the motor.

2. Too much oil or other dirt on the winding.

3. The insulation of incoming and outgoing wires or junction box joints is reduced or damaged.

4. The motor is swept, overheated or the insulation is aged.

II. Solutions

1. Do well in water protection. If any problem is found, the megger can be used to detect and check the insulation resistance, and the motor can be dried.

2. Remove oil or other dirt in time, use a megger to detect and check the insulation resistance, and soak and dry the motor.

3. Carefully check the insulation of the incoming and outgoing wires or junction box joints, wrap or handle the damaged insulation in time.

4. Timely find out the bad hidden danger of the bearing, regularly maintain or refuel; clean the air duct and check the operation of the air blade; timely find out the single-phase operation or overload of the motor.

5. For the motor with aging insulation but good performance, it can be soaked and dried again.